During the startup of the color sorter for miscellaneous grains, the water will be drained every two hours on average. When the color sorter is working, pay attention to the operation of the equipment and the effect of color selection at all times. If you hear abnormal noise or the actual color selection effect is not good, stop the machine immediately for inspection. After the machine is shut down, the finishing work must be done well. The dust on the glass of the slide, hopper and sorting box must be removed to prevent the machine from blocking and rusting.

The dust cleaning brush shall be checked regularly to see whether it is in place. The camera lens and glass shall be kept clean at all times. The filter element of the filter shall be cleaned regularly to prevent the filter element from being blocked. Observe the brightness of the light tube to see if it is normal, and prepare for replacement in time. The color sorter is expensive, so pay attention to maintenance at all times to reduce unnecessary losses. It is believed that the service life of the color sorter will be greatly increased if the above six details are noticed during maintenance.

There are many brands of grain color sorters, such as CCD color sorters, Zhongrui micro vision color sorters, and many color sorters in other regions. The machine mainly provides color selection of a series of grain and miscellaneous agricultural products such as soybeans, corn, broad beans, peanuts, coffee beans, pepper, chickpeas and so on.

Working principle of the coarse grain color sorter: the selected material enters the machine from the hopper at the top. Through the vibration of the vibrator device, the selected material slides down the channel, accelerates to fall into the observation area in the sorting room, and passes between the sensor and the background plate. The color sorter is the leading high-end color sorter in the industry. Many customers want to know about the daily maintenance of the color sorter after purchase. Now, let the R&D technicians systematically explain the daily maintenance knowledge of the color sorter.

Photoelectric detection technology is a new detection technology that combines optical and electronic technologies. Its principle is to use the intensity of the light source's outgoing beam to carry information, use the photodetector to convert the received light intensity changes into electrical information, and then use the demodulation circuit to demodulate, analyze and process the relevant information. The color sorter is a new type of machinery that makes use of the optical and colorimetric characteristics of materials to nondestructive detect defective products and sundries with abnormal colors or surface defects from materials, and automatically sort and remove them. It comprehensively applies new technologies such as electronics and biology, and is a typical high-tech equipment integrating optics, machinery and electronics. At present, the domestic color sorter market is dominated by products from Japan, South Korea, Italy and other countries, most of which are photoelectric color sorters, and the quantity is ccd color sorters.