Taiyiming quartz sand color separator

The selected materials are put into the slow pressure raw material hopper on the top of the equipment. The vibrator shakes the materials and evenly enters the chute. The materials pass through the optical recognition area at a high speed. The visual unit obtains the material signal information, transmits it to the central processing unit and carries out sorting processing according to the set algorithm module, outputs the corresponding rejection command, blows the non-color materials away to the defective product bin, and the good products continue to fall to the finished products bin, Intelligent tai-i bright color separator is selected.

Selection range: 4-120 mesh

Higher single cleaning rate

Bring out ratio is lower

4-26 mesh / 26-120 mesh

Easy replacement of double slideways

Kilohertz level

No dead angle in all directions

Innovative precision identification technology

Minimum optional: 0.125mm minor impurities

Germany's top air suspension high frequency solenoid valve

——泰一明石英砂色选机