Infrared, also known as infrared thermal radiation, is a kind of invisible light. Now, with the success of infrared scientific research technology, infrared technology has made the sorting performance of the color sorter more widely used, and achieved remarkable results.

In the solar spectrum, there must be invisible light outside the red light, which is infrared. It can also be used as a medium for transmission. The wavelength of the infrared ray in the solar spectrum is greater than that of the visible light, and the wavelength is 0.75~1000 μ m。 The infrared ray can be divided into three parts, namely, near-infrared ray, with the wavelength of 0.75 ～ 1.50 μ M; Medium infrared ray, wavelength 1.50 ～ 6.0 μ M; Far infrared ray, wavelength 6.0 ～ 1000 μ M. The light outside the red side of the spectrum is called infrared. The wavelength of infrared ray is longer than that of visible light, and the shortest wavelength is 0.75~3 μ The light of m is near-infrared. Using the different characteristics of near-infrared (NIR) reflection spectrum, the reflected light of the materials flowing down the slideway is confirmed after near-infrared radiation. According to the pre-set spectral analysis information of various materials, it is determined whether they are heterochromatic, and the corresponding work order is issued. The air gun operates once to remove the defective materials. The introduction of NIR near-infrared technology has made the sorting performance of color sorter more widely used. If the application of color sorter is regarded as a revolution in productivity development, the introduction of near-infrared color sorter technology will be the winner of this revolution.

Characteristics of Taming infrared color sorter:

 Taming infrared color sorter has a wide sorting performance, which can sort transparent, plastic and non-metallic particles, and particles of different colors, sizes, shapes, and even physical properties.

 It acts on the selected materials and has higher selectivity.

 According to the imaging principle of different sensors and different materials, different methods are selected and diversified.

 The technology is relatively mature and the user can operate easily.

 The acceleration sensor of the device can adjust the feeding amount according to the highest sorting force.

 The main control of the system adopts more advanced programs than the latest high-speed CPU.

 The vibrating plate adopts the automatic value maintenance function, which can make the supply of raw materials reach the most appropriate level, which is conducive to color selection.

 Frequency maintenance function is adopted to provide certain vibration.

 Timing adopts the air gun with the highest performance, and the maximum spraying speed of this air gun is 1000 times/second. Super service life and stability.

 The duration of the air gun can be set according to the requirements of raw materials and users.