The quartz sand color sorter tells you that the glass or roller below is covered with debris such as mud, sand or dust, and the color difference between the upper camera and the lower background plate cannot be compared. In this state, the color sorter cannot sort materials normally, so it must stop production and clean up the debris on the glass or roller. The ash removal time will be very frequent, and the effective production time will be reduced, directly affecting the output or color separation effect.

Taiyiming quartz sand color sorter is equipped with EMBEDDED software, which greatly reduces the error. It is equipped with a 10.2 inch touch screen, which is easy to operate. It uses high-performance CCD sensors (2048 pixels), and can select bad cameras at the same time. It is a high-performance color sorter that integrates the ability of self detection and automatic selection, and minimizes the error. Even small substances as small as 0.125mm can be selected. In the actual production process, these indicators are integrated and have mutual influence and restriction, which must be investigated at the same time.

The main factors that affect the precision of color separation and the amount of processing per unit time are the motion speed of the servo system, the maximum speed of the conveyor belt and the purity of raw materials; The carry out ratio can be adjusted. If the carry out ratio is set too high, the selection rate and processing capacity will be affected; If the setting is too low, the selected scrap contains too much normal material, which will cause waste.

The unique physical and chemical characteristics of quartz sand make it play a decisive role in aviation, aerospace, electronics, machinery and the rapidly developing IT industry today. In particular, its internal molecular chain structure, crystal shape and lattice change law make it have high temperature resistance, small thermal expansion coefficient, high insulation, corrosion resistance, piezoelectric effect, resonance effect and its unique optical characteristics, It plays an increasingly important role in many high-tech products.

In the global application of quartz products, the semiconductor market takes the lead. Specifically, the market share of semiconductor, optical fiber, optical, photovoltaic and electric light sources is 65%, 14%, 10%, 7% and 4% respectively. Quartz market is a typical monopoly market, with about 70% of global CR5.